library:respeaker:setup

Table of Contents

Setup Respeaker Evaluation Board
Make base system run
- 1. Installing PyAudio

Setup Respeaker Evaluation Board

Reference ReSpeaker 6-Mic Circular Array Kit for Raspberry Pi

Make base system run

1. Installing PyAudio

1.1 安装portaudio

# 1 手动下载portudio
wget http://portaudio.com/archives/pa_stable_v190600_20161030.tgz

# 2 解压
tar -zxvf pa_stable_v190600_20161030.tgz

# 3 切换到portaudio
cd portaudio

# 4 执行配置文件，编译，安装
./configure
make
sudo make install

1.2 修改~/.bashrc

vim ~/.bashrc
# 在文件最后一行加入

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib

1.3 执行sudo ldconfig

1.4 sudo pip install pyaudio

Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting pyaudio
  Downloading https://files.pythonhosted.org/packages/26/1d/8878c7752febb0f6716a7e1a52cb92ac98871c5aa522cba181878091607c/PyAudio-0.2.14.tar.gz (47kB)
    100% |████████████████████████████████| 51kB 196kB/s
  Installing build dependencies ... done
Building wheels for collected packages: pyaudio
  Running setup.py bdist_wheel for pyaudio ... done
  Stored in directory: /home/pi/.cache/pip/wheels/fd/0a/1f/7188251cc9c934c7b224017082ee804b79e0f886b9ff703245
Successfully built pyaudio
Installing collected packages: pyaudio
Successfully installed pyaudio-0.2.14

library/respeaker/setup.txt · Last modified: 2024/03/13 16:52 by lhaosen